E-
14
Ventilating Your Room
2
If necessary, press the (On/Off) button.
Result:
◆
The air conditioner starts up in the mode selected when
the unit was last used.
◆
The unit beeps.
3
If the is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
◆
The unit beeps each time you press the
button.
◆
The air conditioner runs in the Fan mode.
◆
The temperature is set automatically.
➢
You can change modes at any time.
4
Select the fan speed by pressing the button one or more times
until the required setting is displayed:
Low
Medium
High
Result:
Each time you press the button, the unit beeps.
5
To control the direction of the air flow, refer to page 20.
If the air in your room is stale, you can ventilate the room using the Fan feature.
1
If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position (
).
Result:
◆
The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position (
).
Result:
◆
The air simply circulates inside the room.
