E-
0
Removing Excess Humidity
If the atmosphere in your room is very humid or damp,you can remove
excess humidity without lowering the room temperature too much.
If necessary, press the (On/Off) button.
Result:
The air conditioner starts up in the Cool mode.
The unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being.
Plugged in
Stopped
It will begin to cool after three minutes
If the dry indicator is not displayed at the top of the control panel, press the
button on the control panel one or more times until it appears.
Result:
The unit beeps each time you press the
button.
The air conditioner runs in Dry mode.
You can change modes at any time.
3
To adjust the temperature, press the
or
buttons one or more
times until the required temperaturs is displayed.
Possible temperatures are between 8°C and 30°C inclusive.
Result:
Each time you press the
or
buttons:
- The temperature is adjusted by °C
- The unit beeps
The air conditioner starts removing the excess humidity;
the quality of air is adjusted automatically.
4
To control the direction of the air flow,refer to page .
Remote Control
Control Panel
