POWER
Airing Your Room
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
1
If you wish to evacuate stale air outside, push the ventilation lever on the front
of the unit to the right and the open position (
).
Result:
The air inside the room circulates and stale air is evacuated outside.
Otherwise, push the ventilation lever to the left and the closed position (
).
Result:
The air simply circulates inside the room.
2
If necessary, press the
(On/Off) button.
Result:
◆
The operating mode indicator (COOL or FAN) on the
unit comes on.
◆
The air conditioner starts up in the mode selected
when the unit was last used.
◆
The unit beeps twice.
3
If the FAN indicator is not lit up on the unit:
◆
Press the button on the remote control
or
◆
Press the MODE button on the unit one or more times until the FAN
indicator lights up
Result:
◆
The unit beeps each time you press MODE.
◆
The air conditioner starts up in Fan mode.
➢
◆
You can change modes at any time.
◆
When the air conditioner is in Fan mode, the
temperature is not displayed; in this case, you do not
need to set the temperature.
4
To set the fan speed to...
Then...
High
Press the button on the remote control.
Low
Press the button on the remote control.
Result:
Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page 10.
Remote Control
Control Panel
MODE
FAN
COOL
POWER
RESTART
FAN SPEED
HIGH
LOW
MODE
FAN SPEED
HIGH
TEMP.
SWING
LOW
FAN
COOL
POWER
C
Hr.
RESTART
MODE
FAN SPEED
HIGH
TEMP.
SWING
LOW
FAN
COOL
POWER
C
Hr.
RESTART
E-
9
ENGLISH
