Appendix
27
Display
The PM10, PM2.5, PM1.0 concentration values are the same
continuously.
•
When the air is clean, you may not see a difference between the
PM10, PM2.5 and PM1.0 levels.
To check if the sensor is functioning, test it by tearing paper by the
sensor and/or rub them to create some dust. This will cause the PM
levels to change if the sensor is working properly.
The filter replacement indicator is always turned on.
•
After replacing the filter, press and hold the [Lighting] button for 3
seconds or more to reset the filter replacement reminder.
Strange indications appear on the display.
•
If any of the indications
, , , appears, contact a
Samsung Service Centre.
Air circulation
The fan does not seem to circulate the air evenly.
•
Your air purifier is designed to send the clean air upwards for
effective circulation. Since the air circulates clockwise, you may find
the output on the right relatively stronger, and weaker on the left.