21
English
Cl
eaning a
nd Maint
ena
nc
e
Cleaning the air purifier exterior
•
Dampen a soft cloth with lukewarm water and wring it out, and then wipe the product exterior with it.
• Use cotton swabs to wipe the grooves on the rear panel.
• If it is hard to remove dust on the front or rear panel, remove the panel and wash it with water.
CAUTION
• Do NOT wipe the product with an alkaline detergent or disinfectant.
• Do NOT wipe the product surface with sulphuric acid, hydrochloric acid or organic solvent (e.g., thinner,
kerosene, acetone). Do NOT attach a sticker to the surface. The product surface may become damaged.
Cleaning the sensor unit
• Use a vacuum cleaner to clean the area around the
sensor. If the sensor is contaminated with dust or other
foreign material, a high PM concentration may be
detected.
CAUTION
• Do NOT put dust into the sensor inlet.
Cleaning and drying the front panel
STEP 1
Removing the front panel
• Hold both upper sides of the front panel and pull
towards yourself.
• Remove the clip wire from the front of the main unit.
STEP 2
Removing the front mesh
• Turn the front panel over.
• Hold the pulls in the upper portion and remove the
mesh.
PULL
PUL
L
Cleaning and Maintenance
Cleaning and Maintenance
Be sure to disconnect the power plug from the socket before cleaning the product.
DB68-11329A-00_IB_ACR AX9500A_Medium PET_SA_EN_.indd 21
DB68-11329A-00_IB_ACR AX9500A_Medium PET_SA_EN_.indd 21
2021-09-03 오후 2:08:40
2021-09-03 오후 2:08:40