29
English
Appendix
Air quality
The fan speed does not change when the air quality level
changes
• Switch the product to Smart mode.
While in High (fan speed), Sleep or Wind-Free mode, the fan speed
does not change automatically.
– The fan speed also does not change automatically when you
switch the product to Smart Sleep mode after turning on Sleep
mode using the SmartThings app while in Smart mode. Turn off
Sleep mode.
The PM10, PM2.5, PM1.0 levels do not change from Good (05).
• This may happen if the room is closed and the air is clean.
Tear paper near the micro-air sensor several times and/or rub the
torn paper pieces together to create dust. If the PM concentration
changes, the sensor is working properly.
– Dusting off a blanket or cleaning may not necessarily cause sensor
feedback if the dust particles are bigger than PM10, although the
particles are filtered and removed from the air.
The PM10 and PM2.5 levels are different from the values
provided by the Ministry of Environment
• The values provided by the Ministry of Environment are an average of
atmospheric particulate matter readings measured for 1 or 24 hours.
The PM10 and PM2.5 levels you see on the product are real-time
measurements and may differ from the official values.
Display
The filter replacement indicator is kept lit up
•
After replacing with new filters, press and hold the [
] button for
more than 3 seconds to turn off the filter replacement reminder.
The display output is strange.
•
If an indication that looks like ,' , , ' appears, contact your
local Samsung Service Centre.
An 'Update Software?' message appears.
•
This message appears when update is required due to new functions
added or improvements made in the product.
Press the button in the controls area on the main unit of the air
purifier. Update will automatically take place for a maximum of 30
minutes. If you press a button that is not the button, update will be
postponed and the 'Update Software?' message will appear again later.
• Do NOT remove the power plug while update is in progress.
•
The air purifier does not operate during update.
Update software?
Later
Update
DB68-11329A-00_IB_ACR AX9500A_Medium PET_SA_EN_.indd 29
DB68-11329A-00_IB_ACR AX9500A_Medium PET_SA_EN_.indd 29
2021-09-03 오후 2:08:42
2021-09-03 오후 2:08:42