background image

ENG - 3

However, if there is no alternative to cutting off the 
plug, remove the fuse and then safely dispose of 
the plug. Do not connect the plug to a mains 
socket as there is a risk of shock hazard from the 
bared flexible cord. Never attempt to insert bare 
wires directly into a mains socket. A plug and fuse 
must be used at all times.

IMPORTANT

The wires in the mains lead are coloured in 
accordance with the following code:– BLUE = 
NEUTRAL BROWN = LIVE As these colours may not 
correspond to the coloured markings identifying 
the terminals in your plug, proceed as follows:– The 
wire coloured BLUE must be connected to the 
terminal marked with the letter N or coloured 
BLUE or BLACK. The wire coloured BROWN must 
be connected to the terminal marked with the 
letter L or coloured BROWN or RED.

WARNING : DO NOT CONNECT EITHER WIRE TO 
THE EARTH TERMINAL WHICH IS MARKED WITH 
THE LETTER E OR BY THE EARTH SYMBOL 

OR COLOURED GREEN OR GREEN AND YELLOW.

PRECAUTIONS

1. 

Ensure that the AC power supply in your 
house complies with the power 
requirements listed on the identification 
sticker located on the bottom of your 
product. Install your product horizontally, on 
a suitable base (furniture), with enough 
space around it for ventilation (7~10 cm). 
Make sure the ventilation slots are not 
covered. Do not place the unit on amplifiers 
or other equipment which may become hot. 
This unit is designed for continuous use. To 
fully turn off the unit, disconnect the AC plug 
from the wall outlet. Unplug the unit if you 
intend to leave it unused for a long period of 
time.

2. 

During thunderstorms, disconnect the AC 
plug from the wall outlet. Voltage peaks due 
to lightning could damage the unit.

3. 

Do not expose the unit to direct sunlight or 
other heat sources. This could lead to 
overheating and cause the unit to 
malfunction.

4. 

Protect the product from moisture (i.e. 
vases), and excess heat (e.g. a fireplace) or 
equipment creating strong magnetic or 
electric fields. Unplug the power cable from 
the AC wall socket if the unit malfunctions. 
Your product is not intended for industrial 
use. It is for personal use only. Condensation 
may occur if your product has been stored in 
cold temperatures. If transporting the unit 
during the winter, wait approximately  
2 hours until the unit has reached room 
temperature before using.

5. 

The battery used with this product contains 
chemicals that are harmful to the 
environment. Do not dispose of the battery 
in the general household trash. Do not 
expose the battery to excess heat, direct 
sunlight, or fire. Do not short circuit, 
disassemble, or overheat the battery.  

CAUTION : 

Danger of explosion if the battery 

is replaced incorrectly. Replace only with the 
same or equivalent type.

Summary of Contents for B550











































Reviews: