SPECIFY SERVICE INSTRUCTIONS AND WARRANTY
TERMS
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Industry Canada Statement
This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-247 d’Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne
doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y
compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Industry Canada Radiation Exposure Statement (Déclaration d’exposition aux radiations)
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator
& your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non con trôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm
de distance entre la source de rayonnement et votre corps.
•
WARNING
•
STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords
within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
•
Some adult assembly or installation required.
•
This product contains small parts that may cause choking. Keep small parts away from children.
•
This product is NOT intended to replace proper supervision of children. You MUST check your
child’s activity regularly, as this product will not alert parents to silent activities of a child.
•
Before using this product, read and follow all instructions contained in this booklet, and read and
follow all instructions and warnings on the product.
•
NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet
basement, etc.
•
This product is intended for indoor use only.
•
This product is not intended for use as a medical monitor and its use should not replace adult
supervision.
•
The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a
child. If the child moves outside of this range, if may not be able to detect sounds from him or her.
•
It is essential that you check the operating range and condition of the transmitter monitor on initial
installation, and on a regular basis after that.
•
Check reception regularly. Test monitor before use and after changing camera location.
•
Do not take apart the product by yourself.
•
To prevent overheating, keep the product and AC power adapters away from any direct sunlight
and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and
other appliances that produce heat (e.g., amplifiers, televisions and stereos).
•
Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that
may block ventilation.
•
Use only the AC adapters provided with the product, as other adapters may damage the product.
Plug the adapters only into standard household current (100~240 volts AC).
Place the AC adapters avoiding pinch points otherwise you can damage the adapters.
•
When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC
adapter’s cord.
•
Do not use extension cords with the AC power adapters to avoid entanglement.
•
This product should only be serviced by qualified and authorized Hanwha Techwin service centers.
•
Images and sounds are transmitted by the product over public airwaves and transmissions may
be picked up by other units. (Although the transmission distance is 100m or longer, it may vary
depending on whether there are obstacles between the camera and the monitor.)
•
Caution if you use the system to watch a young child, do not place the camera where the child
can reach.
•
When using the system with only battery power and the charge is low, then the picture and or
sound may affected.
•
If this occurs then please connect the AC power adapter.
Summary of Contents for BabyView SEW-3057W
Page 1: ...SEW 3057W BabyView User Manual ...
Page 21: ...MEMO ...
