36
English
Setup
Cinema
:
Select this if you want to play
2-channel movie sound over multi-channels.
Music
:
Select this if you want to play 2-channel
music sound over multi-channels.
NOTE
If you are using HDMI receiver, this option is
available when you set Digital Output setup as PCM.
You can use this option with analog 7.1ch output
when you don’t use HDMI receiver.
Speaker Setting
Set the speaker sound to obtain the best possible
surround sound.
This menu is available only when using 7.1ch
analog output.
Test Tone
A test tone will be sent to
L
C
R
RS
RSB
LSB
LS
LFE
in order, so you can
make sure the speakers are set up correctly.
The test tone can only be activated when no
discs are in the unit.
The test tone outputs through the 7.1 channel
analog outputs only.
•
•
✎
ƒ
ƒ
•
•
•
HDMI
If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you set Bitstream(either Re-encode
or Audiophile) on your setup menu.
If your TV is not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to
Off
.
Dynamic Range Control
You can listen at low volumes but still hear dialog
clearly.
This is only active when a Dolby Digital signal is
detected.
On
: When Movie soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
Off
: You can enjoy the movie with the standard
Dynamic Range.
Downmixing Mode
Set whether to downmix the multi-channel audio
into fewer channels.
Normal Stereo
: Downmixes the multi-channel
audio into two channel stereo. Choose when
connected to equipment that does not support
virtual surround functions such as Dolby Pro
Logic.
Surround Compatible
: Downmixes multi-
channel audio into surround compatible stereo.
Choose when connected to equipment that
supports virtual surround functions such as
Dolby Pro Logic.
DTS Neo:6
You can enjoy multi-channel sound from a simple
2-channel audio source.
Off
:
Outputs a 2-channel audio signal through
the front speakers only.
•
•
•
•
•
•
•
Display
Audio
System
Network
Language
Security
General
Support
Settings
Set the front speaker size to Large.
Speaker Setting
<
Change
"
Enter
'
Return
Front :
Large
Center :
Large
Surround :
Large
Surround Back :
Large
Subwoofer : On
Test Tone
:
Off