36
37
Wi-Fi Direct
Except for BD-F6 series
The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the product
and each other using a peer-to-peer network, without a wireless router.
"
Some Wi-Fi Direct devices may not support the AllShare function if connected via Wi-
Fi Direct. If this is the case, it is advisable to change the network connection method
between devices.
"
Bluetooth transmissions can interfere with the Wi-Fi Direct signal. Before you use the
Wi-Fi Direct function, we strongly recommend that you turn off the Bluetooth function
of any active mobile device.
1.
Turn on the Wi-Fi Direct device and activate its Wi-Fi Direct function.
2.
In the Home screen, select
Settings
, and then press the
E
button.
3.
Select
Network
, and then press the
E
button.
4.
Select
Wi-Fi Direct
, and then press the
E
button. The Wi-Fi Direct devices
that you can connect appear.
5.
You have three ways to complete the Wi-Fi connection:
●
Through the Wi-Fi device.
●
Through the product using PBC.
●
Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the procedure on the device for connecting to
another Wi-Fi Direct device. See the device's user manual for instructions.
2.
When you have completed the procedure, you should see a pop-up on your
TV screen saying that a device that supports Wi-Fi Direct has requested to
connect. Select
OK
, and then press the
E
button to accept.
3.
The Connecting pop-up appears, followed by the Connected pop-up. When
it closes, you should see the device listed on the Wi-Fi Direct screen as
connected.
