22_
connections
connections
CONNECTING TO A TV WITH DVI CABLE (BEST QUALITY)
Using the HDMI-DVI cable (not included), connect the
HDMI OUT
terminal on the rear of the Blu-ray Disc Player
to the
DVI IN
terminal of your TV.
Using the audio cables, connect the
AUDIO (red and white) OUT
terminals on the rear of the Blu-ray Disc
Player to the
AUDIO (red and white) IN
terminals of your TV.
Turn on the Blu-ray Disc Player and TV.
Press the input selector on your TV remote control until the DVI signal from the Blu-ray Disc Player appears on
your TV screen.
If you have set the remote control to operate your TV (see pages 18~19), press the
TV INPUT SEL.
button on
the remote control and select HDMI as the external source of the TV.
Connecting the HDMI cable while the Blu-ray Disc Player’s power is on will result in the player’s video output being
changed to HDMI mode automatically (see page 41).
Depending on your TV, certain HDMI output resolutions may not work.
Please refer to the user's manual of your TV.
If an HDMI-DVI cable is plugged into the TV, the Blu-ray Disc Player’s output resolution is set to HDMI
automatically within 10 seconds.
If Component and HDMI are both connected, HDMI mode is automatically selected. (See page 41)
When you connect the player to the TV using the HDMI cable for the fi rst time or to a new TV, the HDMI output
resolution will be automatically set to the highest provided by the TV
If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.
1.
2.
3.
•
M
White
Red
HDMI-DVI cable
(not included)
Audio Cable
1
A
