Health and Safety Information 172
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the device.
•
Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
•
Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or
accessories.
•
For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury could result.
•
Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the
aircraft's operation.
•
Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action,
or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of
the current signal strength by displaying a number of bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power Save feature is automatically activated. If your
phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital mode.
T919 Roxy.book Page 172 Thursday, September 25, 2008 5:01 PM