background image

English_23

  

C

A

me
RA
 Ope

RATION

ExPosurE

 When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the 

Function Setup switch so that the arrow indicates ‘EXPOSURE’.
Select a desired mode using the 

Function Setup switch.

brighTnEss : 

 Adjusts the video 

brightness. 

lEns

 :  Using this function, you 

can control the screen 

brightness.

DC/VIDEO : Select Auto Iris Lens.

IRIS SPEED (DC) :  Adjusts the Iris control speed of the DC lens. If the 

control speed is too slow or fast, please use this menu to 

adjust the speed.

Level (VIDEO) :  Adjusts the level of video iris signals; the higher the level, the 

brighter the video looks.

FOCUS ADJ (DC/VIDEO) :  To correctly adjust the focus of LENS, activate 

the focus setup mode located at the bottom of 

each lens menu.

Manual :  Select Manual Lens.

 

When using VIDEO lens, adjust the lens VR explained below first and set the focus using 'FOCUS 
ADJ' menu.
Some lenses may not work properly, depending on the setting of the BRIGHTNESS LEVEL.
When Using a Video-Type Auto Iris Lens

 Adjust the ALC adjustment terminal on the lens appropriately. In general, set it to AV 
(Average).
  It may not work properly depending on the installed lens. Set the Level VR of the lens to 

the optimal value.

  Set AGC to OFF and adjust the Lens VR to an appropriate brightness.
  Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the screen brightness 

changes properly. Otherwise, adjust the Lens VR again.

※ 

Lens’ level VR may not operate depending on the type of lens.

1.

2.

-

-

M


1)

2)

3)
4)

EXPOSURE SETUP

 1. 

BRIGHTNESS

 

----

---- 

50

  2. 

LENS

 

 

DC

  3. 

SHUTTER

 

  4. 

AGC

 

HIGH

  5. SSNR4 

ON

  6. 

RETURN

 

Summary of Contents for Beyond SCB-5003










































Reviews: