English -
Setting Up
Press the
TOOLS
button to display the
Tools
menu. You can also display menu
by selecting
Tools → Anynet
+
(HDMI-CEC)
.
Setup
(HDMI-CEC) → Off / On
To use the Function,
Anynet
+
(HDMI-CEC)
must be set to
On
.
When the
Anynet
+
(HDMI-CEC)
function is disabled, all the related operations
are deactivated.
Auto Turn Off → No / Yes
Setting an Device to turn Off automatically when the TV is turned Off.
The active source on the TV remote must be set to TV to use the function.
If you set
Auto Turn Off
to
Yes
, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
Searching Connections
Switching between Devices
.
Press the
TOOLS
button.
Then press the
ENTER
E
button to select
(HDMICEC)
.
.
Press the ▲ or ▼ button to select
Select Device
, then press the
ENTER
E
button.
.
Press the ▲ or ▼ button to select to a particular device and press the
ENTER
E
button. It is switched to the selected device.
.
If you cannot find a device you want, press the ▲ or ▼ button to select
Setup
, then press the
ENTER
E
button.
.
Press the ▲ or ▼ button to select
Searching Connections
, then press the
ENTER
E
button.
The message
Configuring connection
is displayed.
When searching devices completes, the connected devices are listed in the menu.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the
POWER
button, devices connected when the TV
is on or under a specific circumstance are not displayed in the device list. Therefore select
Searching Connections
menu to
search devices.
If you have selected external input mode by pressing the
SOURCE
button, you cannot use the function. Make sure to
switch to an device by using the
TOOLS
button.
Menu
The menu changes depending on the type and status of the devices connected to the TV.
Menu
Description
View TV
mode changes to TV broadcast mode.
Select Device
Shows the device list.
Menu on Device
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc
menu of the DVD recorder will appear.
Device Operation
Shows the play menu of the connected device. E.g. If a DVD recorder is connected,
the play menu of the DVD recorder will appear.
Record
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Receiver
Sound is played through the receiver.
¦
T
❑
■
N
■
N
N
■
¦
N
N
N
N
N
Source List
: TV
Edit Name
(HDMI-CEC)
U
Move
E
Enter
R
Return
TV
Input
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Setup
U
Move
E
Enter
R
Return
TV P
(HDMI-CEC)
: Off
Auto Turn Off
: Off
Searching Connections
Setup
U
Move
E
Enter
R
Return
[530]BN68-01983A-00Eng.indb 22
2009-03-17 �� 5:36:27
