46
English
Advanced Features
¦
Troubleshooting for
Problem
Possible Solution
does not work.
•
Check if the device is an device. The system supports devices only.
•
Only one receiver (home theater) can be connected.
•
Check if the device power cord is properly connected.
•
Check the device’s Video/Audio/HDMI cable connections.
•
Check whether
(HDMI-CEC)
is set to
On
in the setup menu.
•
Check whether the TV remote control is in TV mode.
•
Check whether the remote control is compatible.
•
doesn’t work in certain situations. (Searching channels, operating
Media Play
or
Plug & Play
(initial
setup), etc.)
•
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
•
Check if the Function of device is set on.
I want to start .
•
Check if the device is properly connected to the TV and check if the
(HDMI-CEC)
is set to
On
in the Setup menu.
•
Press the
TOOLS
button to display the menu and select a menu you want.
I want to exit .
•
Select
View TV
in the menu.
•
Press the
SOURCE
button on the TV remote control and select a non- device.
•
Press
z
,
PRE-CH
, and
FAV.CH
to change the TV mode. (Note that the channel button operates
only when a tuner-embedded device is not connected.)
The message “Connecting to
device...” appears on the
screen.
•
You cannot use the remote control when you are configuring or switching to a view mode.
•
Use the remote control when the setting or switching to view mode is complete.
The device does not play.
•
You cannot use the play function when
Plug & Play
(initial setup) is in progress.
The connected device is not
displayed.
•
Check whether or not the device supports functions.
•
Check whether or not the HDMI cable is properly connected.
•
Check whether
(HDMI-CEC)
is set to
On
in the setup menu.
•
Search devices again.
•
You can connect an device using the HDMI cable only. Some HDMI cables may not support
functions.
•
If connection is terminated because there has been a power interruption or the HDMI cable has been
disconnected, please repeat the device scan.
The TV Program cannot be
recorded.
•
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
•
Connect the optical cable between TV and the receiver.
•
The ARC function enables digital output of sound using the
HDMI IN 2(ARC)
port and can only be operated
when the TV is connected to an audio receiver that supports the ARC function.
[PC8000_NA]BN68-02586A-04L03.indb 46
2010-05-07 오후 7:31:27
