Voice SVC 60
2.
Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between
Reject More
spoken commands or names and
Reject
Less
spoken commands or names.
3.
Press
OK
or
to accept the new setting. Press
to discard the new setting and return to the
Voice
Settings
menu.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note:
After you adapt Digit Dial, your phone is customized to your voice, and your
voice only. Others will not be able to use it unless they reset the phone to
factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing:
•
Use Adapt Digits in a quiet place.
•
Make sure you wait for the beep before starting to speak.
•
Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1.
In standby mode, press
Menu
➔
Voice SVC
➔
Voice
Settings
➔
Digit Dialing
. The following options appear in
the display:
• Adapt Digits
• Reset Digits
2.
Use the Up/Down navigation keys to highlight
Adapt
Digits
, then press the
Select
soft key. Your phone
displays text describing the Adapt Digits process.
3.
Press the
key. Your phone displays the first digit
sequence and “
Please say
” plays through the speaker
followed by the four digits appearing in the display.
4.
Wait for the beep and say the digits using your normal
tone of voice. After a moment, the phone plays back the
recording and prompts “
Did the recording sound ok?
”
•
If the recording was good, say “
Yes
.”
Summary of Contents for Byline
Page 120: ...117 ...