background image

7

Washing a Load of Laundry

WM stops the current step of the cycle or does not proceed to the next

step of washing (indication of remain time on LED display may increase).

Your new washing machine is equipped with Fuzzy Logic system, which not only sets the optimum level of
water and other parameters of washing, but also controls the washing process as well as makes necessary
corrections in order to provide better washing results. In the above- mentioned matter, the Fuzzy Logic system
has detected deviations in washing cycle such as: high quantity of detergent at the end of the cycle, high
vibration level while spinning, etc.You can adjust existing wash programs, i.e. change wash temperature and
spin speed. After detection of such abnormalities, the washing machine is suspending the normal course of
program in order to normalize these parameters and continue the cycle. Fuzzy Logic system makes 7
attempts to eliminate such deviations. If it is impossible to normalize the above mentioned deviations by Fuzzy
Logic system, you will see the corresponding indication on LED  lamps. (see chapter “Troubleshooting”) The
operation of Washing machine that corresponds to above- mentioned scheme is considered to be normal.

Washing for the first time

Before washing clothes for the first time, you must run a complete cycle without clothes.  To do this:

1.

Press the 

(On/Off) button.

2.

Pour a little detergent in the detergent drawer 

.

3.

Turn on the water supply to the washing machine.

4.

Press the Temperature button repeatedly until 40

˚

C is dis-

played.

5.

Press the Start/Pause button.

This will remove any water from the manufacturer’s test run
remaining in the machine.

Putting detergent in the washing machine:

1.

Pull out the detergent drawer.

2.

Add laundry detergent into compartment 

.

3.

Add softener into compartment

(if you desire).

Caution:1) Concen trated or thick fabric softener and conditioner must be diluted with a little water before

bein gpoured into the dispenser.(prevents the overflow from becoming locked)

2) You must forbid puttg detergent to the compertement 

because detergent mabe the hole

block up.

4.

Add prewash detergent into compartment 

(if you desire).

 

C1235-02021D-AUS  2004.8.17 1:18 PM  페이지7   1000 hp color LaserJet 5500  T

Summary of Contents for C1035















Reviews: