background image

Washing a Load of Laundry

Washing clothes manually

You can wash clothes manually without using the Fuzzy Logic feature.  To do so:
1. Turn on the water at the water source sink.
2. Press the 

(On/Off) button on the washing machine.

3. Open the door. Put the clothes into the washing machine one for one and loosely.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent in the detergent drawer 

.

7. Repeatedly press the Program button to select the cycle you prefer:

(Cotton, Colour, Synthetics, Delicates, and Hand wash, Quick...)

8. Press the Temperature button to select the temperature (cold water 30˚C, 40˚C, 60˚C, 95˚C).
9.  Press the Spin button to select the spin speed,

C1235AS/C1235A :No spin, No drain, Spin(400, 600, 800, 1000, 1200) No:no spin; rh:no drain
C1035AS/C1035A :No spin, No drain, Spin(400, 600, 800, 1000)
C835AS/C835A

:No spin, No drain, Spin(400, 600, 800)

10.Press the Start/Pause button and the machine will begin the cycle.

When the cycle is finished:
1. 
Open the door.

Note: The door will not open until 3 minutes after the machine stops or the power turns off. 

2. Remove laundry.

Using Delay Start 

You can set the washing machine to finish your wash automatically at a later time, choosing from 1 to 19 
hour delay (in 1 hour increments).

To do this:

1. Manually or automatically set your washing machine for the type of clothes you are washing.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button.  The Delay Start indicator will light, and the clock will begin counting down

until it reaches your finish time.

4. To cancel Delay Start, press the 

(On/Off) button, then turn the washing machine on again.

Selecting options

Prewash
Prewash is only available when washing cotton, colour, synthetics, delicate clothes. To use prewash:
1. Load the prewash detergent into compartment 

of the detergent drawer.

2. Select "Cotton" with the Program select button.
3. Press the Option button until the "Prewash" indicator lights up on the control panel.
4. Press Start/Pause to begin the cycle.

Rinse

+

Your machine will run through an additional rinsing cycle.
The washing duration will be prolonged accordingly.

Sock Wash
Select this option for heavily soiled laundry. The machine soaks the laundry for 40 minutes (the drum rotates
occasionally). This function cannot be used with the Handwash and Quick program.

7

Summary of Contents for C1035A

















Reviews: