6
EN
Setting the Time
Your microwave oven has an inbuilt clock. When power is supplied,
“12:00” is automatically displayed on the display. Please set the current
time. The time can be displayed in either the 12-hour or 24-hour notation.
You must set the clock:
•
When you first install your microwave oven
•
After a power failure
Do not forget to reset the clock when you switch to and from
summer or winter time.
Checking that Your Oven is Operating Correctly
The following simple procedure enables you to check that your oven is
working correctly at all times. If you are in doubt, refer to the section
entitled “What to Do if You are in Doubt or Have a Problem” on the page.
The oven must be plugged into an appropriate wall socket. The
turntable must be in position in the oven. If a power level other
than the maximum (100% - 900 W) is used, the water takes
longer to boil.
Open the oven door by pulling the handle on the right side of the door.
Place a glass of water on the turntable. Close the door.
1.
To display the time in the... Then press the
button...
12-hour notation
Once
24-hour notation
Twice
2.
Press the (
) and (
) buttons to set the hour.
3.
Press the
button.
4.
Press the (
) and (
) buttons to set the minute.
5.
When the right time is displayed, press the
button to
start the clock.
Result:
The time is displayed whenever you are not
using the microwave oven.
Press the
Start
(
) button and set the time to 4 or 5
minutes, by pressing the
Start
(
) button the appropriate
number of times.
Result:
The oven heats the water for 4 or 5 minutes.
The water should then be boiling.
jlXW^}loTWZ^X[mluUGGwG]GGt SGhGX^SGYWW`GGXXaZZGht
