5
EN
Accessories
Depending on the model that you have purchased, you are supplied
with several accessories that can be used in a variety of ways.
caution!!
•
Never use this steamer with a different product or model.
It may cause a fire or fatal damage to the product.
•
When you use this steamer, pour at least 200ml of water before use.
If the amount of water is less than 200ml, it may cause incomplete cooking, or
may cause a fire or fatal damage to the product.
•
Take care when you take out the steamer after cooking time. There is a
danger of scalding.
•
The steamer should be used only in the mode of "
Steam cook
"manual and
"
Auto steam cook
".
•
When you use the Steamer, the steam cover and steam plate should be set
perfectly right. (Please refer to the instruction)
The eggs or the chestnuts would be explode without setting the steam cover
and steam plate as instructed on the Instruction book.
1.
Coupler
, to be placed correctly over the motor shaft in the
base of the oven.
Purpose:
The coupler rotates the turntable.
2.
Roller ring
, to be placed in the center of the oven.
Purpose:
The roller ring supports the turntable.
3.
Turntable
, to be placed on the roller ring with the center
fitting on to the coupler.
Purpose:
The turntable serves as the main cooking
surface; it can be easily removed for cleaning.
4.
Metal racks
(High rack, Low rack), to be placed on the
turntable.
Purpose:
The metal racks can be used to cook two
dishes at the same time. A small dish may be
placed on the turntable and a second dish on
the rack.
The metal racks can be used in
grill, convection and combination cooking
.
5.
Clean water bowl,
to be placed in the right side of the oven.
Purpose:
The water bowl can be used to clean.
6.
Steam water bowl, Steam plate, Steam rack,
Steam Cover
to be placed on the table.
Purpose:
The steamer can be used to steam cook.
7.
Roasting spit, Coupler barbecue and Skewer
, to be
placed in the glass bowl (CE1152M/CE1153F only).
Purpose:
The roasting spit is a convenient way of
barbecuing a chicken, as the meat does not
have to be turned over. It can be used for grill
combination cooking.
8.
Glass bowl
, to be placed on the turntable (CE1152M/
CE1153F only).
Purpose:
Roasting stand is placed on the glass bowl.
9.
Crust plate
, to be placed on the turntable (CE1151T/
CE1153F only).
Purpose:
The crust plate is used to brown food better in
the microwave or grill combination cooking
modes and to keep pastry and pizza dough
crisp.
jlXX\WhukTWY`]YiluUGGwG\GG~ SGqGXSGYWW\GG_a\ZGht
