background image

4

Securing the Installation Space

Ensure some space around the product for ventilation. An internal temperature rise may cause fire and 
damage the product. Be sure to allow the amount of space as shown below or greater when installing the 
product.

 

The exterior may differ depending on the product.

10 cm (3.93 Inches)

10 cm

(3.93 Inches)

10 cm

(3.93 Inches)

10 cm (3.93 Inches)

10 cm

(3.93 Inches)

Precautions for storage

High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used 
nearby.

 

Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service 
fee will be charged.)

Safety Precautions

Caution

RISK OF ELECTRIC SHOCK DO NOT OPEN

Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 
COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of 
this product.

This symbol alerts you that important literature concerning operation 
and maintenance has been included with this product.

Symbols

Warning

A serious or fatal injury may result if instructions are not followed.

Caution

Personal injury or damage to properties may result if instructions are 
not followed.

Before Using the Product

Chapter  01

Summary of Contents for CFG7 Series













































Reviews: