DRAFT
43
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers.
Example:
To speed dial the Contacts entry assigned to Speed Dial 5, press
and hold
, (1-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold
, (2-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press
, then press and hold
, (3-touch dialing).
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
1.
Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry”
on page 38) until you enter
a name for the entry.
2.
After entering the Contacts entry name,
do not press
.
Instead, highlight a number field.
3.
Press
Options
. The following options appear in the display:
• Set Speed Dial
: Assign a speed dial number.
• Set as default
: Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
• Wait
: A hard pause (waits for input from you).
• 2-Sec Pause
: A 2-second pause after which dialing resumes. (For
more information, refer to
“Add Pauses to Contacts
Numbers”
on page 39.)
Select
Set Speed Dial
. The
Speed Dial
screen appears in the
display.
4.
Select an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the
Go To
field using the
keypad.
Important!:
Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.
These numbers are already assigned to Voicemail (001), to
Information (411), to Customer Care (611), and to emergency use
(911).
5.
Press
Set
. You are prompted to confirm your Speed
Dial number assignment.
6.
Press
Yes
to save your Speed Dial assignment and return
to the
New Contact
screen.
Note:
Press
No
to discard the assignment and return to the
Speed Dial
screen.
7.
Press
to save your changes.
Summary of Contents for Chrono SCH-R261
Page 151: ...D R A F T 148 ...