66
GB
Setting the Delay Time
A delay effect can be added to the sound from the Center and Surround speakers to adjust the sound
according to the acoustic condition of the listening room. Initially, the delay time is set to ‘0 ms’.
• When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you
and each speaker is the same. You can set the Delay Time in the Center/Surround Speakers to
customize the sound to the acoustic of your room.
1
Setting the Center Speaker
If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
(A)=Df-Dc
2
Setting the Surround Speakers
If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
(B)=Df-Ds
Distance of (A) (m)
Setting (ms)
0.00
0
0.34
1
0.68
2
1.02
3
1.36
4
1.70
5
Distance of (B) (m)
Setting (ms)
0.00
0
1.02
3
2.04
6
3.06
9
4.08
12
5.10
15
Ideal Center Speaker
Position
Ideal Surround
Speaker Positions
It is desirable to arrange all speakers
within this circle.
00462A CHT-2010/HACO-GB4 5/12/04 6:43 PM Page 66
