background image

English - 7

Troubleshooting

If the TV seems to have a problem, first try this list of possible 

problems and solutions. If none of these troubleshooting tips 

apply, then call your nearest Samsung authorized service 

center.

Poor picture.

  Try another channel.

  Adjust the antenna.

  Check all wire connections.

Poor sound quality.

  Try another channel.

  Adjust the antenna.

No picture or sound.

  Try another channel.

  Press the 

SOURCE

 button.

  Make sure the TV is plugged in.

  Check the antenna connections.

  Make sure the 

MUTE

 button is off.

No color, wrong colors or tints.

  Make sure the program is broadcast in color.

  Adjust the picture settings.

Picture rolls vertically.

  Adjust the antenna.

  Check all wire connections.

  If you are using a VCR, check the tracking.

The TV operates erratically.

  Unplug the TV for 30 seconds, then try operating it again.

Your remote control does not operate your TV.

  Make sure the remote has batteries.

  Check that the “+” and “-” ends of the batteries are 

inserted correctly.

  Check that the batteries are drained.

continued...

The TV won’t turn on.

  Make sure the wall outlet is working.

  Make sure the TV is plugged in.

  Make sure the remote has batteries.

Remote control malfunctions

  Replace the remote control batteries.

  Clean the upper edge of the remote control (transmission 

window).

  Check that the “+” and “-” ends of the batteries are 

inserted correctly.

  Check that the batteries are drained.

AA68-03806M_Eng.indd   7

2007-07-07   ソタタ・9:26:35

Summary of Contents for CL-21Z43MJ









Reviews: