C
HAPTER
T
HREE
: TV O
PERATION
3
.9
O
P E R AT I O N
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press
CH
▲
or
CH
▼
to tune to
the channel that will be
labeled.
2
Press
MENU
to display the
menu.
Press
CH
▼
twice to select
“Channel”.
Press
VOL +
.
3
Press
CH
▼
five times to select
“Labeling”.
Press
VOL +
to begin labeling.
The left-most field will be high-
light.
(Each label has four fields. See
top paragraph.)
4
Press the
CH
▲
or
CH
▼
but-
ton to select a letter, anumber,
“*”, or a blank. (Pressing
CH
▲
results in this sequence:
A,B,...Z,*, blank,0,1,...9).
▼
Note: You cannot select
“Labeling” in the A/V mode.
5
Press
VOL+
to switch to the
next field, which will be high-
light. Select a second letter or
digit using the
CH
▲
and
CH
▼
buttons, as above.
Repeat the process to select
the last two digits.
Press
MENU
twice to set the label and clear the menus from
the screen.
