C
HAPTER
T
WO
: I
NSTALLATION
2
.5
I
N S TA L L AT I O N
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the VCR
and the antenna
terminal on the TV.
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
jacks(AV1~AV3) on the TV.
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack(AV1~AV3) on
the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up
to the left and right audio input jacks of the TV. If your VCR is stereo, you must con-
nect two cables.
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 2.1-2.3). Skip step
1
if you have
not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the back of
the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal on
the back of the VCR.
Summary of Contents for CL29Z7H, CL29Z6H, CL32Z7H, CL3
Page 39: ...CHAPTER FOUR SPECIAL FEATURES 4 2 SPECIAL FEATURES VCR Codes DVD Codes ...
Page 63: ...APPENDIX A 2 MEMO ...
Page 64: ...A 3 APPENDIX MEMO ...
Page 65: ...APPENDIX A 4 MEMO ...
