background image

11

1. Introduction

Safety information

These warnings and precautions are included to prevent injury to you and 

others, and to prevent any potential damage to your machine. Be sure to read 

and understand all of these instructions before using the machine. After reading 

this section, keep it in a safe place for future reference.

Important safety symbols

Explanation of all icons and signs used in this chapter

Operating environment

 Warning

Warning

Hazards or unsafe practices that may result in severe 
personal injury or death.

Caution

Hazards or unsafe practices that may result in minor 
personal injury or property damage.

Do not attempt.

Do not use if the power cord is damaged or if the electrical outlet is 
not grounded.

This could result in electric shock or fire. 

Do not place anything on top of the machine (water, small metal or 
heavy objects, candles, lit cigarettes, etc.).

This could result in electric shock or fire. 

If the machine gets overheated, it releases smoke, makes 
strange noises, or generates an odd odor, immediately turn off 
the power switch and unplug the machine.

The user should be able to access the power outlet in case of 
emergencies that might require the user to pull the plug out.

This could result in electric shock or fire. 

Do not bend, or place heavy objects on the power cord. 

Stepping on or allowing the power cord to be crushed by a heavy 
object could result in electric shock or fire. 

Do not remove the plug by pulling on the cord; do not handle the 
plug with wet hands. 

This could result in electric shock or fire. 

Summary of Contents for CLP-41xN Series






































Reviews: