manualshive.com logo in svg

Samsung CLP-610 Series, User Manual

The Samsung CLP-610 Series delivers exceptional printing performance and professional-quality results. Unlock the full potential of this printer with our comprehensive User Manual. Discover step-by-step instructions, troubleshooting tips, and advanced features. Download the free manual from our website and unleash the power of your Samsung CLP-610 Series printer.

Share
Download
background image

5.  Basic printing

Printing a document  ................................................................................................................................................ 5.1
Canceling a print job  ............................................................................................................................................... 5.1

6.  Maintenance

Printing a machine configuration report  .................................................................................................................. 6.1
Printing a network report  ......................................................................................................................................... 6.1
Monitoring the supplies' life  ..................................................................................................................................... 6.1
Cleaning your machine  ........................................................................................................................................... 6.1

Cleaning the outside  ........................................................................................................................................... 6.1
Cleaning the inside  ............................................................................................................................................. 6.1

Maintaining the cartridge  ......................................................................................................................................... 6.3

print cartridge storage ......................................................................................................................................... 6.3
Expected cartridge life  ........................................................................................................................................ 6.3

Redistributing toner  ................................................................................................................................................. 6.3
Replacing the print cartridge  ................................................................................................................................... 6.4
Replacing the Paper Transfer Belt  .......................................................................................................................... 6.6
Maintenance Parts  .................................................................................................................................................. 6.8
Managing your machine from the website  .............................................................................................................. 6.8

7.  Troubleshooting

Tips for avoiding paper jams  ................................................................................................................................... 7.1
Clearing paper jams  ................................................................................................................................................ 7.1

In the paper feed area  ........................................................................................................................................ 7.1
In the multi-purpose tray  ..................................................................................................................................... 7.3
In the fuser unit area ........................................................................................................................................... 7.4
In the paper exit area .......................................................................................................................................... 7.5
In the optional tray  .............................................................................................................................................. 7.6

Understanding display messages  ........................................................................................................................... 7.7
Solving other problems  ......................................................................................................................................... 7.11

Paper feeding problems .................................................................................................................................... 7.11
Printing problems .............................................................................................................................................. 7.11
Printing quality problems  .................................................................................................................................. 7.13
Common Windows problems ............................................................................................................................ 7.16
Common PostScript problems  .......................................................................................................................... 7.16
Common Linux problems .................................................................................................................................. 7.17
Common Macintosh problems  .......................................................................................................................... 7.17

8.  Ordering supplies and accessories

Supplies .................................................................................................................................................................. 8.1
Accessories ............................................................................................................................................................. 8.1
How to purchase  ..................................................................................................................................................... 8.1

9.  Installing accessories

Precautions to take when installing accessories  ..................................................................................................... 9.1
Installing a memory module  .................................................................................................................................... 9.1

Activating the added memory in the PS printer properties  ................................................................................. 9.2

Summary of Contents for CLP-610 Series

























































Reviews:

No comments

Related manuals for CLP-610 Series

3D Systems CubePro Setup And Repacking Manual preview
CubePro
Brand: 3D Systems Pages: 26
3D Systems CubePro Repair Manual preview
CubePro
Brand: 3D Systems Pages: 39
3D Platform WorkSeries 200 Series Quick Reference Manual preview
WorkSeries 200 Series
Brand: 3D Platform Pages: 9
Oki C911dn Mode D'Emploi preview
C911dn
Brand: Oki Pages: 147
Oki C9600 Series Printing Manual preview
C9600 Series
Brand: Oki Pages: 12
Oki C911 DICOM Maintenance Manual preview
C911 DICOM
Brand: Oki Pages: 297
Oki C9000 Series Printing Manual preview
C9000 Series
Brand: Oki Pages: 111
Oki C9000 Series Brochure & Specs preview
C9000 Series
Brand: Oki Pages: 6
Oki C5510n MFP Specifications preview
C5510n MFP
Brand: Oki Pages: 2
Oki C6000dn Handy Reference preview
C6000dn
Brand: Oki Pages: 108
Oki C5800Ldn Series Guía Del Usuario preview
C5800Ldn Series
Brand: Oki Pages: 266
Oki C5800Ldn Series Manual Do Utilizador preview
C5800Ldn Series
Brand: Oki Pages: 276
Oki C5500n Series Network User'S Manual preview
C5500n Series
Brand: Oki Pages: 121
Oki C9300 Series Setup Manual preview
C9300 Series
Brand: Oki Pages: 12
Oki C5400 Series Manuel preview
C5400 Series
Brand: Oki Pages: 354
Oki C5400 Series Reference preview
C5400 Series
Brand: Oki Pages: 78
Oki C5400 Series User Manual preview
C5400 Series
Brand: Oki Pages: 328
Oki C5300n Install Manual preview
C5300n
Brand: Oki Pages: 24

Brands by name

Popular brands

Load more brands