Network setup
_ 30
4.
Read
License Agreement
, and check
I accept the terms of the
License Agreement
. Then, click
Next
.
The program searches the machine.
If your machine is not found in the network or locally, the following
window will appear.
•
Check if you want to install the software without
connecting the printer to the network or locally.
-
Check this option to install the software without a machine
connected. In this case, the print a test page window will be
skipped.
•
Search again
-
Press this button to research connected machine.
-
When you click this button, the firewall notice window
appears;
Turn off the firewall and click
Search again
. For Windows
operating system, click
Start
>
Control Panel
>
Windows
Firewall
, and inactivate this option.
Then click
Next
in the
Firewall Notice
window.
Turn off the firewall from the third party's program beside
the operating system. Refer to the manual provided by
individual programs.
•
Direct Input
-
The
Direct Input
allows you to search a specific machine
on the network.
-
Search by IP address
: Enter the IP address or the host
name. Then click
Next
.
To verify your machine’s IP address, print a network
configuration report (See "Printing a machine report" on
page 62).
-
Search by network path: To find a shared machine (UNC
Path), enter the shared name manually or find a shared
printer by clicking the
Browse
button. Then click
Next
.
•
Help
-
If your machine is not connected to the computer or
network, This help button gives detailed information about
the how to connect the machine.
•
Set IP Address
-
If you want to set a specific IP address on a specific
network machine, click the
Set IP Address
button. The
Set
IP Address
window appears. Do as follows:
a) Select a machine to be set with a specific IP address from
the list.
b) Configure an IP address, subnet mask, and gateway for the
machine manually and click
Apply
to set the specific IP
address for the network machine.
c) Click
Next
.
5.
The searched machines will be shown on the screen. Select the one you
wish to use and click
Next
.
If the driver searched only one machine, the confirmation window
appears.
6.
After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click
Print a test page
.
Otherwise, just click
Next
and skip to step 7.
7.
If the test page prints out correctly, click
Yes
.
If not, click
No
to reprint it.
8.
To register as a user of the machine in order to receive information from
Samsung, click
On-line Registration
. You are now registered to the
Samsung web site.
9.
Click
Finish
.
•
After the driver setup, you may enable firewall.
•
If the printer driver does not work properly, follow the steps below
to repair or reinstall the driver.
a) Make sure that the machine is connected to your machine and
powered on.
b) From the
Start
menu, select
Programs
or
All Programs
>
Samsung Printers
>
your printer driver name
>
Maintenance
.
c) Select the option as you wish, follow the instruction on the
window.
Macintosh
1.
Make sure that the machine is connected to your network and powered
on. Also, your machine’s IP address should have been set.
2.
Insert the supplied software CD into your CD-ROM drive.
3.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
4.
Double-click the
MAC_Installer
folder.
5.
Double-click the
Installer OS X
icon.
6.
Enter the password and click
OK
.
7.
The Samsung Installer window opens. Click
Continue
.
8.
Read the license agreement and click
Continue
.
