Samsung CLX-3170FN series User Manual Download

Page: 55 / 220

Faxing_ 55

RECEIVING A FAX

Changing receiving modes

1. Press Fax.
2. Press Menu until Fax Setup appears on the bottom line of the display

and press OK.

3. Press the left/right arrow until Receiving appears and press OK.
4. Press OK when Receive Mode appears.
5. Press the left/right arrow until the fax reception mode you want appears.

•

In Fax mode, the machine answers an incoming fax call and
immediately goes into the fax reception mode.

•

In Tel mode, you can receive a fax by pressing On Hook Dial and
then Color Start or Black Start. You can also pick up the handset of
the extension phone and then press the remote receive code. (See
"Receiving manually using an extension telephone" on page 55.)

•

In Ans/Fax mode, an answering machine attached to your machine
answers an incoming call, and the caller can leave a message on the
answering machine. If the fax machine senses a fax tone on the line,
the machine automatically switches to Fax mode to receive the fax.
(See "Receiving automatically in Ans/Fax mode" on page 55.)

•

In DRPD mode, you can receive a call using the Distinctive Ring
Pattern Detection (DRPD) feature. Distinctive Ring is a telephone
company service which enables an user to use a single telephone
line to answer several different telephone numbers. For further
details, see "Receiving faxes using DRPD mode" on page 55.

6. Press OK to save your selection.
7. Press Stop/Clear to return to ready mode.

Receiving automatically in Fax mode

Your machine is preset to Fax mode at the factory. When you receive a fax,
the machine answers the call on a specified number of rings and
automatically receives the fax.

To change the number of rings,

see "Ring to Answer" on page 57.

Receiving manually in Tel mode

You can receive a fax call by pressing On Hook Dial and then pressing
Black Start or Color Start

when you hear a fax tone from the remote

machine.

The machine begins receiving a fax and returns to ready mode when the
reception is completed.

Receiving manually using an extension telephone

This features works best when you are using an extension telephone
connected to the EXT socket on the back of your machine. You can receive
a fax from someone you are talking to on the extension telephone without
going to the fax machine.

When you receive a call on the extension phone and hear fax tones, press
the keys *9* on the extension phone. The machine receives the fax.

Press the buttons slowly in sequence. If you still hear the fax tone from the
remote machine, try pressing *9* once again.

*9* is the remote receive code preset at the factory. The first and the last
asterisks are fixed, but you can change the middle number to whatever you
wish. For details about changing the code, see

"Rcv Start Code" on

page 57.

Receiving automatically in Ans/Fax mode

To use this mode, you must attach an answering machine to the EXT socket
on the back of your machine.

If the caller leaves a message, the answering machine stores the message
as it would normally. If your machine detects a fax tone on the line, it
automatically starts to receive the fax.

Receiving faxes using DRPD mode

Distinctive Ring is a telephone company service which enables an user to
use a single telephone line to answer several different telephone numbers.
The particular number someone uses to call you is identified by different
ringing patterns, which consist of various combinations of long and short
ringing sounds. This feature is often used by answering services who
answer telephones for many different clients and need to know which
number someone is calling in on to properly answer the phone.

Using the Distinctive Ring Pattern Detection (DRPD) feature, your fax
machine can learn the ring pattern you designate to be answered by the fax
machine. Unless you change it, this ringing pattern will continue to be
recognized and answered as a fax call, and all other ringing patterns will be
forwarded to the extension telephone or answering machine plugged into
the EXT socket. You can easily suspend or change DRPD at any time.

Before using the DRPD option, Distinctive Ring service must be installed on
your telephone line by the telephone company. To set up DRPD, you will
need another telephone line at your location, or someone available to dial
your fax number from outside.

To set up the DRPD mode:

1. Press Fax.
2. Press Menu until Fax Setup appears on the bottom line of the display

and press OK.

3. Press the left/right arrow until Receiving appears and press OK.
4. Press the left/right arrow until DRPD Mode appears and press OK.

Waiting Ring appears on the display.

5. Call your fax number from another telephone. It is not necessary to

place the call from a fax machine.

•

To use the Ans/Fax mode, attach an answering machine to the
EXT socket on the back of your machine.

•

If you do not want other people to view your received documents,
you can use secure receiving mode. In this mode, all of the
received faxes are stored in memory. For further details, see
"Receiving in secure receiving mode" on page 56.

•

If you have set your machine to Ans/Fax mode and your
answering machine is switched off, or no answering machine is
connected to EXT socket, your machine automatically goes into
Fax mode after a predefined number of rings.

•

If your answering machine has a user-selectable ring counter, set
the machine to answer incoming calls within 1 ring.

•

If you are in Tel mode (manual reception) when the answering
machine is connected to your machine, you must switch off the
answering machine, or the outgoing message from the answering
machine will interrupt your phone conversation.