![background image](http://html1.mh-extra.com/html/samsung/clx-330-series/clx-330-series_user-manual_3758336114.webp)
Understanding display messages
114
4. Troubleshooting
Check Fax Line
The fax line is not perperly
connected to the LINE port.
Connect the fax line to
the LINE port not to the
EXT port (see "Rear view"
on page 23).
Not proper room
temp. Move set
The machine is in a room
with improper room
temperature.
Move the machine to a
room with proper room
temperature.
Output bin Full
Remove paper
The output tray is full. Or the
sensor is not facing down.
Remove papers from the
output tray, the machine
resumes printing. Or
make sure the sensor is
facing down. If the
problem persists, call for
service.
Prepare new
Transfer belt
The life of the transfer belt
will expired soon.
Replace the transfer belt
with a new one. Contact
the service
representatives.
Replace new
Transfer belt
The life of the transfer belt
has expired.
Replace the transfer belt
with a new one. Contact
the service
representatives.
Transfer Belt Error
The transfer belt cannot be
controlled.
Reboot the power and try
the printing job again. If
the problem persists,
please call for service.
Message
Meaning
Suggested solutions
Prepare new
Transfer roller
The life of the transfer belt
will expired soon.
Replace the transfer belt
with a new one. Contact
the service
representatives.
Replace new
Transfer roller
The life of the transfer belt
has expired.
Replace the transfer belt
with a new one. Contact
the service
representatives.
Replace
Fuser Soon
The life of the fuser unit will
be expired soon.
Replace the fuser unit
with a new one. Contact
the service
representatives.
Replace new
Fuser unit
The life of the fuser unit will
be expired.
Replace/Install
Waste Toner Tank
The life span of the waste
toner container has expired
and the printer will stop
printing until a new waste
toner container is placed
into the printer.
Replace a waste toner
container with a
Samsung-genuine waste
toner container.
Message
Meaning
Suggested solutions
Summary of Contents for CLX-330 Series
