![background image](http://html1.mh-extra.com/html/samsung/clx-8380nd/clx-8380nd_user-manual_4105291033.webp)
3
.6
<Getting Started>
Changing the display language
To change the language that appears on the display, refer to the following
steps.
1
Press
Machine Setup
on the control panel.
2
Press
Admin Setting
.
3
When the login message appears, enter password with number
keypad and press
OK
. (Page 3.5)
4
Press the
General
tab.
5
Press the down arrow to switch the screen and press
Language
.
6
Select the desired language.
7
Press
OK
.
Setting job timeout
When there is no input for a certain period of time, the machine exits the
current location. You can set the amount of time the machine will wait.
1
Press
Machine Setup
on the control panel.
2
Press
Admin Setting
.
3
When the login message appears, enter password with number
keypad and press
OK
. (Page 3.5)
4
Press the
General
tab.
5
Press
Timers
.
6
Select
System Timeout
.
7
Select
On
.
8
Select a duration using left/right arrows.
9
Press
OK
.
Using power saving feature
The machine provides power saving features.
1
Press
Machine Setup
on the control panel.
2
Press
Admin Setting
.
3
When the login message appears, enter password with number
keypad and press
OK
. (Page 3.5)
4
Press the
General
tab.
5
Press down arrow to switch the screen, press
Power Saver
.
6
Select appropriate option and time.
•
Low Power Save
: Keeps the temperature of the fuser unit under
100 °C, and turns off the fans within the machine except a core fan
for the fuser unit.
•
Power Save
: Turns off all the fans even for the fuser unit after
certain time.
7
Press
OK
.
Setting the default tray and paper
You can select the tray and paper you would like to keep using for printing
job. (Page 10.2)
1
Press
Machine Setup
on the control panel.
2
Press
Admin Setting
.
3
When the login message appears, enter password with number
keypad and press
OK
. (Page 3.5)
4
Press the
General
tab.
5
Press the down arrow to switch the screen and press
Tray
Management
.
6
Select tray and its options such as paper size and type.
7
Press
OK
.
Note
If the optional tray is not installed, the tray options on the screen
is grayed out.
Changing the default settings
You can set the default values for copy, fax, email, scan and paper all at
once.
1
Press
Machine Setup
on the control panel.
2
Press
Admin Setting
.
3
When the login message appears, enter password with number
keypad and press
OK
. (Page 3.5)
4
Press the
General
tab >
Default Settings
>
Default Option
.
Summary of Contents for CLX-8380ND
Page 1: ......
Page 137: ...Samsung Printer Software section...
Page 141: ...4 Scanning 47 Scanning with USB 47 Scanning with network 47...
Page 187: ...Ver 5 00...