![background image](http://html1.mh-extra.com/html/samsung/clx-8380nd/clx-8380nd_user-manual_4105291050.webp)
5
.7
<Copying>
Note
To remove shadows of a book edge, press the
Image
tab >
Erase Edge
>
Book Center and Edge Erase
.
4
Select the binding option.
•
Off
: Disables this feature.
•
Left Page
: Prints left page of the book.
•
Right Page
: Prints right page of the book.
•
Both Page
: Prints both facing pages of the book.
5
Press
OK
.
6
Press
Start
on the control panel to begin copying.
Booklet copying
The machine automatically prints on one or both sides of the paper, which
are then folded to produce a booklet with all of the pages in the correct
sequence.
The machine will also reduce and correctly adjust the position of each
image to fit on the selected paper.
1
Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2
Press
Copy
from the
Main
screen.
3
Select the tray in
Paper Supply
.
4
Press the
Advanced
tab >
Booklet
.
5
Press
On
to activate this feature, and select detailed settings for
each option.
•
1 Sided Original
: Copys on one side of the paper.
•
2 Sided Original
: Copys on both sides of the paper.
6
Press
OK
.
7
Press
Start
on the control panel to begin copying.
Note
This feature is possible only with A4, Letter, Legal, Folio, Oficio,
JIS B5, ISO B5, Executive, A5 and Statement sized paper.
Cover copying
The machine automatically adds covers to your copied set using stock
taken from a different tray. Covers must be the same size and orientation
as the main body of the job.
1
Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2
Press
Copy
from the
Main
screen.
3
Select the tray in
Paper Supply
.
4
Press the
Advanced
tab >
Covers
.
Note
Once you have set the
Paper Supply
option to
Auto
, you
cannot use this feature.
5
Press
On
to use this feature, and select detailed settings for each
option.
•
Position
: Selects whether the cover will be placed at the front,
back, or both.
•
Cover Sheet
: Selects whether the cover will be 1 sided, 2 sided, or
blank paper.
•
Paper Source
: Select the paper tray, where the cover sheet is
loaded.
6
Press
OK
.
7
Press
Start
on the control panel to begin copying.
Transparency copying
When you prepare transparencies for presentations, use this feature to
copy the information.
Note
Before you start this special copy job, set the tray's Paper Types
and Paper Size to Transparency.(Page 4.9)
1
Place the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2
Load the right-sized transparencies into the tray you have set.
3
Set the paper type to
Transparency
.
4
Press
Copy
from the
Main
screen.
5
Press the
Advanced
tab >
Transparencies
.
6
Select
Transparencies
option.
•
No Separator
: Does not place separator sheets between
transparencies.
•
Blank Sheet
: Places a blank sheet between transparencies.
•
Printed Sheet
: Places the same image on the divider sheets as
printed on the transparency.
7
Select media sources, in case you selected either
Blank Sheet
or
Printed Sheet
.
8
Press
OK
.
9
Press
Start
on the control panel to begin copying.
Erasing edges
Summary of Contents for CLX-8380ND
Page 1: ......
Page 137: ...Samsung Printer Software section...
Page 141: ...4 Scanning 47 Scanning with USB 47 Scanning with network 47...
Page 187: ...Ver 5 00...