![background image](http://html1.mh-extra.com/html/samsung/clx-8380nd/clx-8380nd_user-manual_4105291055.webp)
6
.4
<Faxing (Optional)>
5
Press
On
.
6
Enter
Job Name
using the keyboard on the display, select
Start
Time
with left/right arrows.
• If you do not enter
Job Name
, the machine assigns the job name
as 'Fax Send Job xxx'. 'xxx' number are set in order.
Note
Start Time
is the specific time you want the fax to be sent. You
can set
Start Time
on a 24 hour basis and 15 minutes later than
the current time. For example, if it is 1:00, then you can set the
time starting from 1:15. If the set time is incorrect, the warning
message will appear and the machine resets it to the current
time.
7
Press
OK
to start storing the scanned original data into memory.
Note
To cancel delaying a fax, press
Off
before sending is activated.
Sending a priority fax
This function is used when a high priority fax need to be sent ahead of
reserved operations. The original is scanned into memory and
immediately transmitted when the current operation is finished. In
addition, priority transmission will interrupt a sending to multiple
destinations between stations (example, when the transmission to station
A ends, before transmission to station B begins) or between redial
attempts.
1
Press
Fax
from the
Main
screen.
2
Place the originals face up in the DADF.
3
Adjust the document settings in the
Image
tab and the
Basic
tab.
4
Press the
Advanced
tab >
Priority Send
.
5
Press
On
.
6
Press
OK
.
7
Press
Start
to start the urgent fax job.
Receiving a fax
This section explains how to receive a fax, and the special receiving
methods available.
Changing the receive modes
Your machine is preset to
Fax
mode at the factory. When you receive a
fax, the machine answers the call on a specified number of rings and
automatically receives the fax. But if you want to change the
Fax
mode
to another mode, refer to next steps.
1
Press
Machine Setup
on the control panel.
2
Select
Admin Setting
. When the login message pops up, then
enter password and press
OK
. (Page 3.5)
3
Press the
Setup
tab >
Fax Setup
>
Fax Initial Setup
>
Receive
Mode
.
4
Select the option.
•
Telephone
: Receives a fax by pressing
On Hook Dial
and then
Start
.
•
Fax
: Answers an incoming fax call and immediately goes into the
fax reception mode.
•
Answering Machine/Fax
: Is for when an answering machine
attached to your machine. Your machine answers an incoming call,
and the caller can leave a message on the answering machine. If
the fax machine senses a fax tone on the line, the machine
automatically switches to
Fax
mode to receive the fax.
5
Press
OK
.
Note
When the memory is full, the machine can no longer receive any
incoming fax. Secure free memory to resume by removing data
stored in the memory.
Receiving manually in Telephone mode
You can receive a fax call by pressing
On Hook Dial
and then pressing
Start
when you hear a fax tone from the remote machine. The machine
begins receiving a fax.
Receiving automatically in Answering Machine/
Fax mode
To use this mode, you must attache an answering machine to the EXT
socket on the back of your machine. (Page 1.4)
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine detects a fax tone on the
line, it automatically starts to receive the fax.
Summary of Contents for CLX-8380ND
Page 1: ......
Page 137: ...Samsung Printer Software section...
Page 141: ...4 Scanning 47 Scanning with USB 47 Scanning with network 47...
Page 187: ...Ver 5 00...