![background image](http://html1.mh-extra.com/html/samsung/clx-8380nd/clx-8380nd_user-manual_4105291066.webp)
7
.3
<Scanning>
User authentication for network scanning
To send an email, FTP, SMB or Network, you must register authorized
local or network users using SyncThru™ Web Service.
• If user authentication has been activated, only authorized local users
or on the DB server (SMB, LDAP, Kerberos) can send scanned data to
the network (email, FTP, SMB).
• For network scanning using the authentication feature, you must
register the network or local authentication configuration using the
SyncThru™ Web Service.
• User authentication has 3 options: none (Default), network
authentication, and local authentication.
Registering local authorized users
1
Enter your machine’s IP address as the URL in a browser and click
Go
to access the web site of your machine.
2
Click
Machine Settings
.
3
Select
Local Authentication
on the
General Setup
of the
User
Authentication
web page.
4
Click
Add
.
5
Select an index number corresponding to the location for storing the
entry, from 1 to 500.
6
Enter your name, auth ID, password, e-mail address and phone
number.
You need to enter the registered user ID and password in the
machine when you start scanning to email from the control panel.
7
Click
Apply
.
Register authorized network users
1
Enter your machine’s IP address as the URL in a browser and click
Go
to access the web site of your machine.
2
Click
Machine Settings
.
3
Select
Network Authentication
on the
General Setup
of
User
Authentication
web page.
4
Click
Apply
and
OK
.
5
Select the
Authentication Type
that you prefer.
6
Configure the values for each feature, as follows.
7
Click
Apply
.
Network user authenticated by Kerberos
1
Enter the realm used for
Kerberos
login.
2
Select
IP Address
or
Host Name
.
3
Enter the IP address in dotted decimal notation or as a host name.
4
Enter the server port number, from 1 to 65535.
The default port number is 88.
5
You can add a backup domain as a previous step.
6
Click
Apply
.
Network user authorized by SMB
1
Enter the domain that is used for
SMB
login.
2
Select
IP Address
or
Host Name
.
3
Enter the IP address in dotted decimal notation or as a host name.
4
Enter the server port number, from 1 to 65535.
The default port number is 139.
5
You can add a backup domain as a previous step.
6
Click
Apply
.
Note
User can add up to 6 alternate domains.
Network authorized user by LDAP
1
Enter your machine’s IP address as the URL in a browser and click
Go
to access the web site of your machine.
2
Click
Machine Settings
and
LDAP Server Setup
.
3
Select
IP Address
or
Host Name
.
4
Enter the IP address in dotted decimal notation or as a host name.
5
Enter the server port number, from 1 to 65535.
The default port number is 389.
6
Enter
Search Root Directory
, the top search level of the LDAP
directory tree.
7
Select
Authentication method
. Two options for LDAP server login.
Anonymous
: This is used to bind with null password and login ID
(Password and login ID are grayed out in SWS).
Simple
: This is used to bind with the login ID and password in SWS.
8
Check the box next to
Append Root to Base DN
for adding
Base
DN
to login name.
9
Select
Match User’s Login ID to the following LDAP attribute
(options are CN, UID, or UserPrincipalName).
10
Enter your login name, password, maximum number of search
results and search timeout.
Summary of Contents for CLX-8380ND
Page 1: ......
Page 137: ...Samsung Printer Software section...
Page 141: ...4 Scanning 47 Scanning with USB 47 Scanning with network 47...
Page 187: ...Ver 5 00...