7
.8
<Scanning>
Changing the scan feature settings
This part explains how to adjust the document settings for each scan job,
such as resolution, duplex, original size, type, color mode, darkness, and
more. The options you change will be maintained for a certain time, but
after that period, the options will be reset to default values.
Duplex
This feature especially applies when the original documents to be
scanned are two-sided. You can select whether the machine scans only
one side of the paper or both sides of the paper.
Press
Scan
>
Scan to Email
(Or
Scan to Server
) > the
Basic
tab >
Duplex
. Use left/right arrows to toggle the values.
•
1 Sided
: For originals that are printed on one side only.
•
2 Sided
: For originals that are printed on both sides.
•
2 Sided, Rotate Side 2
: For originals that are printed on both
sides. But the back is rotated 180 degrees.
Note
To use
2 Sided
and
2 Sided, Rotate Side 2
, you have to load
the originals on the DADF. Because, if the machine can not
detect the original on DADF, automatically changes the option to
1 Sided
.
Resolution
You can adjust document resolution.
Press
Scan
>
Scan to Email
(Or
Scan to Server
) > the
Basic
tab >
Resolution
. Use left/right arrows to toggle the values. The higher value
you select the clear result you get. But the scanning time may take longer.
Commonly, 100 dpi , 200 dpi and 300 dpi resolution are available only
when
Color Mode
is set to
Color
or
Gray
. The following table shows
detailed information feature, resolution and file format options.
Feature
Resolution (dpi)
File Format
Scan to Email
100, 200, 300, 400,
600
PDF, Single-Page
TIFF, Multi-Page TIFF,
JPEG
NetScan
100, 200, 300, 400,
600
PDF, TIFF, JPEG
Scan to Server
100, 200, 300, 400,
600
PDF, Single-Page
TIFF, Multi-Page TIFF,
JPEG
Original Size
You can specify the scanning area on the originals by selecting the pre-
defined size, or putting in the margin value or
Auto
. If you set this option
to
Auto
, the machine senses and determines the size of the original.
Press
Scan
>
Scan to Email
(Or
Scan to Server
) > the
Advanced
tab
>
Original Size
. Use up/down arrows to go to the next screen. Select the
appropriate option and press
OK
.
Original Type
You can set the original document type in order to enhance the quality of
a document being scanned.
Press
Scan
>
Scan to Email
(Or
Scan to Server
) > the
Image
tab >
Original Type
. Select the appropriate option and press
OK
.
•
Text
: For originals that have text or line art.
•
Text/Photo
: For originals that have both text and photographs
together.
•
Photo
: For originals that are continuous tone photographs.
Color Mode
Use this option to scan the original in
Mono
,
Gray
or
Color
mode.
Press
Scan
>
Scan to Email
(Or
Scan to Server
) > the
Image
tab >
Color Mode
. Select the appropriate option and press
OK
.
•
Color
: Uses color to display an image. 24 bits per pixel, 8 bits for
each RGB, is used for 1 pixel.
Summary of Contents for CLX-8380ND
Page 1: ......
Page 137: ...Samsung Printer Software section...
Page 141: ...4 Scanning 47 Scanning with USB 47 Scanning with network 47...
Page 187: ...Ver 5 00...