Samsung CLX-8640 series Service Manual Download

Page: 316 / 441

4. Troubleshooting

► Error Code

C9–2220

► Error message

TR Failure: #C9-2220. Install transfer roller again

► Symptom

The transfer roller is not installed properly.

► Troubleshooting method

1) Open the side cover.

2) Remove and reinstall the second transfer roller.

(

Refer to 3.2.5 Transfer Roller.

)

3) Close the side cover.

4) Enter SVC mode.

To enter SVC mode, press 1,2,3 number keys simultaneously. When the password dialog box appears, enter
“1934” and press the “OK” button.

5) Select “TRNASFER” (INFORMATION > Supply Status > Field Replacement Unit > TRNASFER)

6) Select “T2 Roller”. The “RESET” button will be activated. Click “RESET” to clear the T2 roller.

7) Exit SVC mode by pushing the home button.

4-157

Summary of Contents for CLX-8640 series












































































































































































































































































































































































































































Search results

Summary of Contents for CLX-8640 series

Reviews:

Related manuals for CLX-8640 series

Brands by name

Popular brands

Samsung CLX-8640 series, Service Manual

Search results

Summary of Contents for CLX-8640 series

Reviews:

Related manuals for CLX-8640 series

Brands by name

Popular brands