Scanning
_ 101
Erasing backside Images
This feature prevents scanning the other side’s image shown through the
original paper
When you use this feature,
Adjust Background
in the
Image
tab are
inactivated.
1.
Press the
Image
tab >
Erase Backside Image
from the display screen.
2.
Press the appropriate option.
•
Off:
Sets this option off.
•
Erase:
Lightens the background. Use the left/right arrow’s to toggle
the values.
3.
Press
OK
from the display screen.
Scan to Edge
You can set the machine to scan the full size of a page as it is. Usually, the
machine scans a page except edges, which means the margin, especially
when you do the scan job with certain sized paper in the tray. But if you
scan and send it right away via the network, as a file, the machine does not
need to exclude the edges from the originals.
1.
Press the
Image
tab >
Scan to Edge
from the display screen.
2.
Press
On
.
3.
Press
OK
from the display screen.
Quality
You can use this option to produce a high quality document. The higher
quality you select, the larger file size you get.
1.
Press the
Output
tab >
Quality
from the display screen.
2.
Press the appropriate option.
•
Best:
Produces a high quality image, but the file size will be larger.
•
Normal:
Produces a normal quality imag,.
3.
Press
OK
from the display screen.
When you set
Color Mode
to
Mono
in the
Image
tab, the
Quality
option is grayed out.
Scan Preset
This feature allows you to use optimized settings for your specific scanning
job.
1.
Press the
Output
tab >
Scan Preset
.
2.
Press the appropriate option.
•
Custom:
Applies the current scan settings that you have chosen.
•
Sharing and Printing:
Produces a small-sized file for normal
quality documents.
•
High Quality Printing:
Produces a high quality output with the
largest file size.
•
OCR:
Produces scanned output for OCR software. You can expect
the highest quality images.
•
Archival Record:
Produces an electronic file which is one of the
smallest file size of the output.
•
Simple Scan:
Used for a simple document with texts only. The file
size of output is small.
3.
Press
OK
from the display screen.