17
GB
How to Operate Double Quantity Pad
1
Press the Double Quantity pad.
2
Press the desired memory number pad.
Result:
Cooking time which was multiplied by the preset factor appears
in the display and cooking starts with time digits counting down.
➢
You don’t need to press
button to start heating.
P
P
You can select the beep tone you require. There are 4 sound levels
available.
1
Hold down
and then press NUMBER 0 pad. Hold together for 2
seconds.
Result:
Beep tone is changed to one level higher than current one.
➢
Beep tone 0 does not make beep sound.
Settings are circulating whenever you press the hidden keys in the following order.
Snd 0
→
Snd 1
→
Snd 2
→
Snd 3
→
Snd 0 (No sound)
➢
Default tone is Snd 2.
Controlling Beep Tone
+ 30sec
Error Codes
Error Items
Code
Error Beep
Cause/Remedy
Cause:
Power frequency is other than 50 Hz.
Remedy: • Unplug the power cord plug and check if the
power frequency is 50 Hz.
• Plug the power cord in 50 Hz power source and
see If “E1” appears. If the error code is displayed
again even after the correct power source is
provided, contact the nearest service centre.
Power frequency Error(50/60Hz)
E1
One long beep
for 2 sec
Cause:
Memory IC (EEPROM IC) is not working correctly.
In this case, other features except for memory
function work properly. (You can operate the oven
manually)
Remedy:
Press CANCEL pad one or more times and try
to start a memory heating. If the error code “E5”
persists, contact your nearest service centre.
EEPROM Error
E5
One long beep
for 2 sec
CM1029-EU-2 2/11/00 4:59 AM Page 17
