- 24 -
Temp Sensor
Error
Code
Case
Solution
Page
E-21
TEMPER SENSOR OPEN
In case the value of the
temperature sensor value is
more than 250 during operation/
cancellation.
Check sensor part and connection of sensor
housing and PCB’s connector
26 Page
E-22
TEMPER SENSOR SHORT
In case the value of the
temperature sensor value is
less than 5 during operation/
cancellation.
27 Page
E-23
UNFINISHED PREHEAT
In case the oven has not reached
the desired temperature although
a certain amount of time has
passed(Unfinished preheating.)
Check heater
29 Page
E-25
OVER 230°DURING
OPERATION OF MWO MODE
In case the temperature rises
over 230° during operation of
mwo mode (fire sensed.)
30 Page
Weight Sensor
Error
Code
Case
Solution
Page
E-31
WEIGHT SENSOR OPEN
In case the value of the weight
sensor value is more than 999
during operation/cancellation.
Check sensor
26 Page
E-32
WEIGHT SENSOR SHORT
In case the value of the weight
sensor value is less than 30 during
operation/cancellation.
27Page
E-37
TURN TABLE TAKE OFFIn case
of taking off the support tray
Check support-tray and glass tray and then
perform the Calibration again
31 Page
E-38
Calibration
In case of 0g calibration, Weight
sensor value is not correct.
E-39
Calibration
In case of 650g calibration, Weight
sensor value is not correct.
4-1 Failure Codes (Continued)
