The problem
Try this!
The picture is distorted.
The compression of video content may cause picture distortions, especially in fast moving
pictures from sports programmes and action movies.
If the signal reception is weak or poor, screen distortion may be visible but it is not a
malfunction.
Mobile phones used close to the TV (within 1 m) may cause noise on analogue and digital
channels.
The colour is wrong or
missing.
If you’re using a Component connection, make sure that the Component cables are
connected to the correct jacks.
Incorrect or loose connections may cause colour problems or a blank screen.
The colour is poor or the
picture is not bright
enough.
Go to
Picture
and then adjust the
Picture Mode
,
Brightness
,
Sharpness
and
Colour
settings.
•
Settings
Picture
Picture Mode
•
Settings
Picture
Expert Settings
Brightness
•
Settings
Picture
Expert Settings
Sharpness
•
Settings
Picture
Expert Settings
Colour
See if
Energy Saving Mode
has been enabled.
•
Settings
General
Eco Solution
Energy Saving Mode
Try resetting the picture.
•
Settings
Picture
Expert Settings
Reset Picture
There is a dotted line on the
edge of the screen.
Change
Picture Size Settings
to
16:9 Standard
.
•
Settings
Picture
Picture Size Settings
Picture Size
16:9 Standard
The picture is black and
white.
Use a composite cable when you connect AV equipment to the TV.
If you are using the composite cable, connect the video cable (Yellow) to the VIDEO (Yellow /
Green) input port.
The COMPONENT IN port may not be supported depending on the model or
geographical area.
The picture won’t display in
full screen.
HD channels will have black bars on either side of the screen when displaying upscaled SD
(4:3) content.
Black bars will appear at the top and bottom of the screen when you watch movies that have
aspect ratios different from your TV.
Adjust the picture size options on your external device or set the TV to full screen.
•
Settings
Picture
Picture Size Settings
Picture Size
- 129 -
