16
EN
Multistage Cooking
Your microwave oven can be programmed to cook food in up to four
stages (the Convection , MiConvection and Fast Preheat mode
can not be used in Multistage cooking). Example: You wish to Auto
defrost food and cook it without having to reset the oven after each stage.
You can thus defrost and cook a 1.8 kg chicken in four stages:
•
Defrosting
•
Microwave cooking for 30 minutes
•
Grill for 15 minutes
Defrosting and standing must be the first two stages. Combination
and Grill can only be used once during the remaining two stages,
However microwave can be used twice(at two different power levels).
Fast Preheating the Oven
For convection cooking, it is recommended that you preheat the oven to
the appropriate temperature before placing the food in the oven.
When the oven reaches the requested temperature, it is maintained for
approximately 10 minutes; it is then switched off automatically.
Check that the heating element is in the correct position for the type of
cooking that you require.
In case the inner temperature has reached the preset
temperature, the beeps 6 times when temperature and the preset
temperature is kept for 10 minutes.
If you would like to know the current temperature of oven cavity,
press
Fast Preheat
button.
1.
Press the
Auto Defrost
(
) button..
2.
Select the type of food that you are cooking by pressing
the
Auto Defrost
(
) button.
3.
Set the weight by pressing the (
) and ( ) buttons the
appropriate number of times (1800 g in the example).
4.
Press the
Microwave
(
) button.
5.
Set the microwave power level by pressing the
Microwave
(
) button to select the appropriate Power Level
(450W in the example).
6.
Set the cooking time by
10min
,
1min
, and
10s
button.
(30 minutes in the example)
7.
Press the
Grill
(
) button.
8.
Pressing the
10min
,
1min
, and
10s
buttons appropriate
number of times (15 minutes in the example).
9.
Press
Start
button.
Result:
Cooking starts:
When cooking has finished, the oven will beep
and flash “0” four times. The oven will then
beep one time per minute.
1.
Press the
Fast Preheat
button.
Result:
The following indications are displayed:
250°C (temperature)
2.
Press the
Fast Preheat
button one or more times to set
the temperature.
3.
Press the
Start
button.
Result:
The oven is preheated to the requested
temperature.
Upon arrival at the preset temperature, the
oven beeps 6 times and the temperature is
kept for 10 minutes.
After 10 minutes, the beeps 4 times and the
operation stops.
jzX]]Wz{mhTWZZ[`hTWXluUGGwGX]GGm SGzGX[SGYWW^GGXWaZ^Ght
