background image

_ warranty and service

What should I do if the     display is illuminated?

Check for the following:

• 

The control panel is partially covered by a damp cloth or liquid. To reset, 
press the “On / Off” control sensor.

What should I do if the     display is illuminated?

Check for the following:

• 

The hob is overheated because of abnormal operation.

• 

After hob is cooled down, press the “On / Off” control sensor for resetting.

What should I do if the   display is illuminated?

Check for the following:

• 

Cookware is unsuitable or too small or no cookware has been placed on the 
cooking zone

• 

If you use suitable cookware, displayed message will automatically disapear.

If you request a service call because of an error made in operating the appliance, 
the visit from the customer service technician may incur a charge even during the 
warranty period.

servICe

Before calling for assistance or service, please check the section “Troubleshooting.”
If you still need help, follow the instructions below.

Is it a technical fault?

If so, please contact your customer service centre.

Always prepare in advance for the discussion. This will ease the process of 

diagnosing the problem and also make it easier to decide if a customer service 

visit is necessary.

Please take note of the following information.

• 

What form does the problem take?

• 

Under what circumstances does the problem occur?

When calling, please know the model and serial number of your appliance. This 

information is provided on the rating plate as follows:

• 

Model description

• 

S / N code (10 digits)

We recommend that you record the information here for easy reference.

Model:
Serial number:

When do you incur costs even during the warranty period?

• 

if you could have remedied the problem yourself by applying one of the 

solutions provided in the section “Troubleshooting,”

• 

if the customer service technician has to make several service calls because 

he was not provided with all of the relevant information before his visit and as 

a result, for example, has to make additional trips for parts. Preparing for your 

phone call as described above will save you the cost of these trips.

CTI613GI series_EN-00205A_XSA.in26   26

2009-02-25     10:10:36

Summary of Contents for CTI613GI series





























Reviews: