26
_ hob use
Switching the child safety lock off
1.
Touch the Lock control sensor for approximately 3 seconds. An acoustic
signal will sound as confirmation.
TIMER
There are two ways to use the timer:
Using the timer as a safety shutoff
If a specific time is set for a cooking zone, the cooking zone will shut itself off once
this period of time has elapsed. This function can be used for multiple cooking zones
simultaneously.
Using the timer to count down
The countdown timer cannot be used if a cooking zone has been switched on.
Setting the safety shutoff
The cooking zone(s) for which you want to apply the safety shutoff must be
switched on.
1.
Using the timer’s control sensor
, select the cooking zone for which the
safety shutoff time is to be set.
After the first active cooking zone is selected, touching the timer’s control
sensor will cause the corresponding indicator to flash slowly.
For example, the front left indicator corresponds to the front left cooking
zone.
will appear in the timer display.
The next active cooking zone is selected by touching the timer’s control sensor
again
.
approx. 3 sec.
CTR164NC01_XSA_00338A-02-EN.indd 26
19/06/2014 15:56:34
