before you begin & hob use _
23
BEFORE
YOU
BEGIN
& h
OB
USE
SETTING ThE SAFETY ShUTOFF
The cooking zone(s) for which you want to apply the safety shutoff must be
switched on.
1.
Using the timer’s control sensor , select the cooking zone for which the safety
shutoff time is to be set.
After the first active cooking zone is selected, touching the timer’s control sensor
will cause the corresponding indicator to flash slowly.
will appear in the timer display.
The next active cooking zone is selected by touching the timer’s control sensor
again .
2.
Use the
or timer setting control sensors to set the desired amount of
time, for example, 15 minutes, after which the cooking zone will automatically
switch itself off.
The safety shutoff is now activated.
To display the time remaining for any of the cooking zones, use the timer’s control
sensor .
The corresponding control indicator will begin to blink slowly.
The settings are reset using the or timer setting control sensors. After the
set period of time has elapsed, the cooking zone automatically switches itself off,
an acoustic signal sounds as confirmation and the timer display indicates.
To make the settings more quickly, touch any of the or timer setting
control sensors until the desired value is reached.
If the timer setting control sensor is touched first, the time setting will begin at
99 minutes; if the timer setting control sensor is touched first, the time setting
will begin at 1 minute.
CTR432NB02_XSM_DG68-00315A-04_EN.indd 23
2016-11-04 2:58:22
