background image

English  5

Saf
ety ins

truc

tions

Do not use the hob to heat aluminium foil, products wrapped 
in aluminium foil or frozen foods packaged in aluminium 
cookware.
Liquid between the bottom of the pan and the hob can produce 
steam pressure. Which may cause the pan to jump.
Always ensure that the hotplate and the base of the pan are 
kept dry.
The cooking zones will become hot when you cook.
Always keep small children away from the appliance.
Keep all packaging materials well out of the reach of children, 
as packaging materials can be dangerous to children.
This appliance is to be used only for normal cooking and frying 
in the home. It is not designed for commercial or industrial use.
Never use the hob for heating the room.
Take care when plugging electrical appliances into mains 
sockets near the hob. Mains leads must not come into contact 
with the cooktop.
Overheated fat and oil can catch fire quickly. Never leave 
surface units unattended when preparing foods in fat or oil, for 
example, when cooking chips.
Turn the cooking zones off after use.

CAUTION

Be sure the appliance is properly installed and grounded by a 
qualified technician.
The appliance should be serviced only by qualified service 
personnel. Repairs carried out by unqualified individuals may 
cause injury or serious malfunction. If your appliance is in need 
of repair, contact your local service centre. Failure to follow 
these instructions may result in damage and void the warranty.
Flush - mounted appliances may be operated only after they 
have been installed in cabinets and workplaces that conform 
to the relevant standards. This ensures sufficient protection 
against contact for electrical units as required by the essential 
safety standards.
If your appliance malfunctions or if fractures, cracks or splits 
appear:

• 

switch off all cooking zones;

• 

disconnect the hob from the mains supply; and

• 

contact your local service centre.

If the cooktop cracks, turn the appliance off to avoid the 
possibility of electric shock. Do not use your hob until the glass 
surface has been replaced.

CTR432NB02_XSP_DG68-00315C-00_EN.indd   5

2017-07-24     6:00:32

Summary of Contents for CTR432NB02





















Reviews: