background image

English  3

Using this manual

Safety instructions

The safety aspects of this appliance comply with all accepted technical and safety 
standards. However, as manufacturers we also believe it is our responsibility to 
familiarize you with the following safety instructions.

WARNING

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge, unless they have 
been given supervision or instruction concerning use of the 
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play 
with the appliance.
If the supply cord is damaged, it must be replaced by the 
manufacturer, its service agent or similarly qualified persons in 
order to avoid a hazard.
Appliance should allow the disconnection of the appliance 
from the supply after installation. The disconnection may be 
achieved by having the plug accessible or by incorporating a 
switch in the fixed wiring in accordance with the wiring rules.

If the surface is cracked, switch off the appliance to avoid the 
possibility of electric shock.

During use the appliance becomes hot. Care should be taken to 
avoid touching heating elements inside the hob.

Using this manual

Please take the time to read this owner’s manual, paying particular attention to the 
safety information contained in the following section, before using your appliance. 
Keep this manual for future reference.
If transferring ownership of the appliance, please remember to pass the manual on 
to the new owner.

The following symbols are used in this User Manual:

WARNING

Hazards or unsafe practices that may result in 

severe personal injury or death

.

CAUTION

Hazards or unsafe practices that may result in 

minor personal injury or property 

damage

.

CAUTION

To reduce the risk of fire, explosion, electric shock, or personal injury when using 
your hob, follow these basic safety precaution.

NOTE

Useful tips, recommendations, or information that helps users manipulate the 
product.

Model name & serial number

Both the model name and the serial number are labeled underneath the cooktop 
base.

For later use, write down the information or attach the additional product label 
(located on the top of the product) onto the current page.

Model Name

Serial Number

CTR432NB02_XSP_DG68-00315C-00_EN.indd   3

2017-07-24     6:00:32

Summary of Contents for CTR432NB02





















Reviews: