background image

English - 1

AA68-03853A-00

The actual configuration of your TV may be different,
depending on your model.

Control Panel

(depending on the model)

You can use the 

6

buttons to switch the TV on when it is

in standby mode depending on the model.

The 

5

and 

6

buttons also have the same function as the

œ

/

/

/

buttons on the remote control.

If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.

Front (or Side) Panel

1

Remote control sensor

2

Standby indicator

3

Power on/off

4

On-screen menu display

5

Volume adjustment

6

Channel selection

The actual configuration of your TV may be different,
depending on your model.

Connection Panel

(depending on the model)

cable television network

Rear Panel

Whenever you connect an audio or video system to your
television, ensure that all elements are switched off. 

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 

1

(75 

coaxial socket).
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.

Connecting to the SCART Input/Output

The SCART

2

and SCART

3

connectors are used for

equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART

2

is also used for equipment with an RGB

output, such as a video game device or video disc player.

or

Please be sure to match the color coded input terminals
and cable jacks.

Connecting to the RCA Input

The 

1

(

AUDIO

-

L

/

R

) and 

2

(

VIDEO

) connectors are used

for equipment, such as a camcorder, video disc player, or
video game device.

Connecting to the S-VIDEO Input

The 

3

(

S-VIDEO IN

) and 

1

(

AUDIO

-

L

/

R

) connectors are

used for equipment with an S-Video output, such as a
camcorder or VCR.

COLOR TELEVISION

Owner’s Instructions

Before operating, please read this manual thoroughly, 

and retain it for future reference.

Register your product at 

www.samsung.com/global/register

1

Audio input

2

Video input

3

S-Video input

Front (or Side) Panel

AA68-03853A-00Eng_E.asia  4/21/06  3:45 PM  Page 1

Summary of Contents for CW-29Z404N









Reviews: