4-3-9 RF AGC Adjustment
Set the AGC data to 23 (Factory Mode).
4-3-10 Sub-Color Adjustment
Set data to (Factory Mode).
4-3-11 Geometry Adjustment
SC
→
VS
→
VSL
→
HS
1. Input a lion head pattern (in the PAL channel).
2. Set the SC (S-Correction) as follows : 9 (21”),
9 (20”), 0 (14”) and VA 40 so that the lion
head circle becomes oval.
3. Adjust with VSL (Vertical-Slope) so that the
bottom margin of the picture is 4.
Fig. 4-7
4. Adjust with VS (Vertical shift) so that the top
margin of the picture is 4.
Fig. 4-8
5. Adjust with HS (Horizontal Shift) so that the
lion-head pattern and CRT centers are aligned.
Fig. 4-9
6. Adjust HS (using the width coil) so that the
left and right margins of the picture are 5.
Alignment and Adjustments
4-8
Samsung Electronics
4
5
5
4
PSR
NSR
2
5
