10_
setting up
ASSEMBLE THE FREEZER
DRAWER
To reattach the freezer drawer, assemble parts in
reverse order.
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you
want to make sure the Refrigerator is level so that
you can make fi nal adjustments. If the Refrigerator
is not level, it will not be possible to get the doors
perfectly even.
Insert a fl at-blade screwdriver (-) into a notch on the
left control lever, and turn it count clockwise to level
the refrigerator. (You turn the lever clockwise to lower
the refrigerator and counterclockwise to raise it.)
flat-blade
flat-blade
screwdriver(-)
screwdriver(-)
Control
Control
Lever
Lever
Both control levers must be touching the fl oor
to avoid possible personal injury or property
damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
CAUTION
DISASSEMBLE THE FREEZER
DRAWER
1.
Push the upper drawer in completely.
2.
Remove the tilting pocket (
1
) by pulling on both
brackets (
2
) upward at the same time.
1
2
3.
Take out the lower basket (
3
) by lifting the
basket up from rail system.
3
4.
Remove four 10 mm hex-head bolts from both
sides.
5.
Lift the freezer door up from the rails.
DA99-03404D-11.indb 10
DA99-03404D-11.indb 10
2015. 5. 7.
8:10
2015. 5. 7.
8:10
